Which One Is Proper For You?


Final Up to date on June 14, 2026 by Giorgia Guazzarotti

cerave sa cleanser vs foaming cleanser

On the floor, CeraVe SA Cleanser and CeraVe Foaming Cleansers look just about an identical: similar pump bottle, similar cleaning elements, similar pores and skin sorts that’ll profit from them. Properly, really CeraVe says they’re for various pores and skin sorts. The previous is for acne-prone pores and skin and the latter for shiny pores and skin. However oily pores and skin is usually acne-prone, so in the event you’re questioning which one is greatest for you and which one could be only a compromise, I’ve obtained you. On this article, I’ll evaluation each formulation, so you may choose the appropriate cleanser for YOUR pores and skin.

What Do These CeraVe Cleansers Have In Frequent?

SURFACTANTS

Surfactants are what really clear your pores and skin. They’re molecules with one finish that loves water and one finish that loves oil, to allow them to seize onto the sunscreen, sebum, and air pollution sitting in your face and rinse all of it away. The surfactants in these CeraVe cleansersare all on the gentler finish of the spectrum: they clear correctly with out stripping your pores and skin the best way harsher choices like sodium lauryl sulphate do. They work higher collectively too. The mixture is kinder to pores and skin than any one in every of them could be alone.

  • Cocamidopropyl Hydroxysultaine comes from coconut oil and is likely one of the mildest surfactants round. It really tones down the irritation potential of the opposite surfactants it’s combined with, which is why you typically see it in delicate pores and skin formulation. It additionally helps create foam while not having something harsher to do the job.
  • Sodium Lauroyl Sarcosinate is the one doing a lot of the precise cleansing. It’s derived from an amino acid and is nice at chopping by means of oil and buildup, however it’s not aggressive about it the best way SLS (that stands for Sodium Lauryl Sulfate, by the best way).
  • Sodium Methyl Cocoyl Taurate can be coconut-derived and rounds out the mix properly. It’s identified for being straightforward on pores and skin and produces a wonderful, steady lather. Principally it helps the cleanser really feel good to make use of whereas retaining the entire components from tipping into irritating territory. 

CERAMIDES

Ceramides are fat that your pores and skin makes naturally. They stay in your pores and skin barrier and mainly act because the glue holding the whole lot collectively, retaining moisture in and irritants out. When your barrier is in fine condition, you’ve obtained loads of them. When it’s not (whether or not that’s from age, over-exfoliating, harsh merchandise, or one thing like eczema) ceramide ranges drop and your pores and skin begins to really feel dry, tight, and reactive. The excellent news is that placing ceramides again on topically really works to restore it.

  • Ceramide NP is the commonest ceramide in human pores and skin and probably the most researched. It’s the primary one chargeable for retaining moisture in and sustaining the general integrity of your barrier. 
  • Ceramide AP is extra concerned in how pores and skin cells stick collectively and shed correctly within the outer layers. It retains the floor cohesive, which issues for a way easy and resilient your pores and skin feels.
  • Ceramide EOP is a longer-chain ceramide that helps preserve the organised layered construction of your barrier.

Associated: Are Ceramides Key To Wholesome Pores and skin?

What Else Is In These Cleansers?

CERAVE FOAMING CLEANSER

  • Aqua / Water / Eau: The bottom of the components and the solvent the whole lot else dissolves into.
  • Glycerin: A humectant that pulls moisture into the pores and skin and stops the cleanser from leaving your face feeling tight and dry after rinsing. 
  • PEG-150 Pentaerythrityl Tetrastearate: A thickener and emulsifier that provides the components its physique and stops it from feeling like glorified water. It additionally retains the whole lot combined collectively evenly so the components stays steady.
  • Niacinamide: Vitamin B3, and one of many best-studied elements in skincare full cease. In a cleanser it rinses off earlier than it could do its full factor, however it nonetheless brings some calming and barrier-supporting advantages whereas it’s in your pores and skin.
  • PEG-6 Caprylic/Capric Glycerides: Helps oil and water play properly collectively within the components. It additionally contributes to that comfortable, non-tight feeling your pores and skin has after you rinse.
  • Propylene Glycol: A humectant and solvent that helps different elements dissolve correctly and take in into pores and skin. 
  • Carbomer: An artificial thickener that provides the components its gel-like texture and helps hold the whole lot suspended evenly. 
  • Methylparaben: A preservative that retains micro organism and mold out of the product.
  • Sodium Chloride: Salt. Actually simply used to thicken the components and regulate the feel.
  • Sodium Lauroyl Lactylate: A mild cleanser and emulsifier constructed from lactic acid and a fatty acid. It helps with the cleaning and in addition has some delicate conditioning properties that go away pores and skin feeling nicer after rinsing.
  • Ldl cholesterol: Not the sort you are concerned about on the physician. In skincare, ldl cholesterol works with the ceramides to restore your pores and skin’s barrier.
  • Disodium EDTA: A chelating agent, which mainly means it grabs onto steel ions floating round within the components and stops them from messing with the opposite elements to forestall spoilage.
  • Propylparaben: A second preservative working alongside methylparaben. 
  • Citric Acid: Right here to regulate the pH of the components, to not exfoliate. 
  • Tetrasodium EDTA: Does the identical job as disodium EDTA, grabs steel ions to guard components stability. 
  • Hydrolyzed Hyaluronic Acid: Hyaluronic acid that’s been damaged down into smaller items so it could get into pores and skin a bit extra simply. It pulls moisture in and holds onto it. Even in a rinse-off product it provides some hydration whereas it’s sitting in your face.
  • Phytosphingosine: A fats that’s naturally present in pores and skin and performs a task in how your pores and skin barrier stays wholesome. It’s additionally antimicrobial and calming.
  • Xanthan Gum: A pure thickener that provides the components a easy, even texture and retains the whole lot distributed persistently. 

CERAVE SA CLEANSER

  • Aqua / Water / Eau: The bottom of the components and the solvent the whole lot else dissolves into. 
  • Glycerin: A humectant that pulls moisture into the pores and skin and stops the cleanser from leaving your face feeling tight and dry after rinsing. 
  • Niacinamide: Vitamin B3, and one of many best-studied elements in skincare full cease. In a cleanser it rinses off earlier than it could do its full factor, however it nonetheless brings some calming and barrier-supporting advantages whereas it’s in your pores and skin.
  • Gluconolactone: A mild exfoliating acid that additionally has antioxidant properties and helps pores and skin maintain onto moisture. It’s a lot kinder than one thing like glycolic acid and it helps loosen the useless pores and skin cells sitting on the floor to allow them to rinse away.
  • PEG-150 Pentaerythrityl Tetrastearate: A thickener and emulsifier that provides the components its physique and stops it from feeling like glorified water. It additionally retains the whole lot combined collectively evenly so the components stays steady.
  • Zea Mays Oil / Corn Oil: Corn oil, used right here as an emollient so as to add a little bit of softness and assist pores and skin really feel conditioned after rinsing. 
  • Carbomer: An artificial thickener that provides the components its gel-like texture and helps hold the whole lot suspended evenly. 
  • Calcium Gluconate: A calcium salt that works alongside gluconolactone. The 2 are sometimes paired collectively as a result of calcium helps regulate how briskly the exfoliation occurs, retaining it mild and managed. 
  • Sodium Chloride: Salt. Actually simply used to thicken the components and regulate the feel. 
  • Sodium Benzoate: A preservative that retains micro organism and mold out of the product. 
  • Sodium Lauroyl Lactylate: A mild cleanser and emulsifier constructed from lactic acid and a fatty acid. It helps with the cleaning and in addition has some delicate conditioning properties that go away pores and skin feeling nicer after rinsing.
  • Cholecalciferol: Vitamin D3. There’s some analysis suggesting it performs a task in pores and skin barrier operate and has calming properties, although the proof in topical kind continues to be constructing. 
  • Ldl cholesterol: Not the sort you are concerned about on the physician. In skincare, ldl cholesterol works with the ceramides to restore your pores and skin’s barrier.
  • Phenoxyethanol: One of the vital frequent preservatives in fashionable skincare. It retains the product free from micro organism and mold, and regardless of the fearmongering you’ll see on-line, it’s thought of secure and well-tolerated on the concentrations utilized in cosmetics.
  • Disodium EDTA: A chelating agent, which mainly means it grabs onto steel ions floating round within the components and stops them from messing with the opposite elements. 
  • Tetrasodium EDTA: Does the identical job as disodium EDTA, grabs steel ions to guard components stability. 
  • Hydrolyzed Hyaluronic Acid: Hyaluronic acid that’s been damaged down into smaller items so it could get into pores and skin a bit extra simply. It pulls moisture in and holds onto it. Even in a rinse-off product it provides some hydration whereas it’s sitting in your face.
  • Phytosphingosine: A fats that’s naturally present in pores and skin and performs a task in how your pores and skin barrier stays wholesome. 
  • Xanthan Gum: A pure thickener that provides the components a easy, even texture and retains the whole lot distributed persistently. 
  • Ethylhexylglycerin: A preservative booster that works alongside phenoxyethanol to maintain the product free from microbial contamination. It additionally has some delicate skin-conditioning properties and helps the components really feel nicer on pores and skin.

WHICH FORMULA IS BETTER?

Truthfully, the formulation of those two face washes are extra comparable than totally different. Identical important ceramides, similar niacinamide, similar cleaning elements: the core components is an identical. The one actual distinction is that the SA Cleanser throws salicylic acid and gluconolactone into the combination. Salicylic acid is an exfoliant that’s oil-soluble, which suggests it could really get inside your pores moderately than simply engaged on the floor. As soon as it’s in there, it dissolves the combination of oil and useless pores and skin cells that causes blackheads and breakouts. Gluconolactone works in another way: it stays on the floor and loosens the bonds between useless pores and skin cells so that they shed extra simply, which is what makes pores and skin look smoother and brighter over time.

The difficulty is that in a cleanser, they’re solely in your pores and skin for perhaps 30 seconds earlier than you rinse them off. That’s not a variety of time. They’ll do one thing, however not almost as a lot as they’d in a product you really go away in your pores and skin. You probably have delicate pores and skin and use this on daily basis, that every day salicylic acid publicity can nonetheless add up and irritate you even at a low focus, so it’s not fully innocent both. But when blackheads are your essential concern, you’re higher off with a salicylic acid toner or serum that sits in your pores and skin lengthy sufficient to truly get in there and work. Identical with gluconolactone – a leave-on exfoliant will do a significantly better job on dullness than a rinse-off one ever will.

What’s The Texture Like?

The SA Cleanser comes out as a transparent, skinny gel that doesn’t seem like a lot in your hand. Work it into moist pores and skin and it builds into a lightweight foam. The Foaming Cleanser begins the identical method, as a gel, however foams up extra: lighter and airier than you’d anticipate, not heavy or soapy. Each rinse off clear with out leaving any residue or that tight, stripped feeling.

What’s The Perfume Like?

Each are fragrance-free and also you received’t discover any chemical scent both. Should you’re somebody who’s used to their cleanser smelling like one thing, these will really feel a bit medical at first. You get used to it quick, and your pores and skin will thanks for it. You probably have delicate pores and skin, yo’ll love this as a result of it received’t irritate your pores and skin (until you employ them an excessive amount of, however that’s true of any facial cleanser).

What’s The Product Package deal Like?

The SA Cleanser is available in a pump bottle, which I admire for a cleanser. No squeezing, no guessing how a lot you’re getting, no product exploding out while you’ve had a protracted day. The Foam cleanser additionally is available in an analogous bottle, it simply has inexperienced accents moderately than blue ones. 

How To Use Them

A cleanser is all the time step one of your skincare routine. Moist your face with lukewarm water first: not scorching, which strips pores and skin, not chilly, which doesn’t do a lot. Pump a small quantity into your fingers, work it into moist pores and skin utilizing mild round motions, and rinse totally. Neither of those wants a variety of product to do its job; somewhat goes a great distance as soon as it hits water. The SA Cleanser works on each face and physique, so in the event you’re coping with tough or bumpy pores and skin in your arms or chest, you should utilize it there too. Each are designed for every day use, although when you have drier or extra reactive pores and skin, as soon as a day might be sufficient. Twice every day with the SA Cleanser particularly can tip into drying territory.

Efficiency & Private Opinion

The Foaming Cleanser is a simple every day wash. It cleans effectively (removes extra oil, sunscreen, the final buildup of the day) with out leaving pores and skin feeling wrecked afterwards. For shiny and regular pores and skin sorts that’s really more durable to seek out than it sounds, as a result of most foaming cleansers both don’t clear correctly or strip the whole lot and go away you tight and flaky. This one manages neither. Pores and skin feels clear however not compromised. The ceramides and niacinamide aren’t going to remodel your pores and skin in a rinse-off components (the contact time is just too brief for that), however they cease the cleanser from being actively damaging, which is greater than most handle. You probably have dry pores and skin, this most likely isn’t for you. It’s not harsh, however it’s not nourishing sufficient for a barrier that’s already struggling.

The SA Cleanser is extra fascinating on paper however trickier in apply. The salicylic acid loosens the bonds between useless pores and skin cells, will get into the pore lining, retains congestion from build up. For shiny or acne-prone pores and skin, or anybody coping with tough texture or that sandpaper feeling on the arms and chest, pores and skin genuinely does get smoother with constant use. However it is a rinse-off product. Salicylic acid wants contact time, and also you’re washing it off inside a minute. Outcomes are there, however they’re delicate. Should you’re anticipating Paula’s Selection-level exfoliation from a cleanser, you’ll be let down. The dryness can be actual. Utilizing this twice a day on something apart from reliably oily pores and skin will dry you out, which triggers extra oil manufacturing, which defeats the entire level. As soon as a day, or a number of instances per week in case your pores and skin leans drier, is the smarter strategy.

Value & Availability 

CeraVe Foaming Facial Cleanser ($15.99): Boots, Look Implausible, Goal, Ulta, and Walmart

CeraVe Renewing SA Cleanser ($15.99): Goal, Ulta, and Walmart

Which CeraVe Cleanser Ought to You Go For?

You probably have oily or regular pores and skin and also you simply need one thing that cleans correctly with out wrecking your barrier, the Foaming Cleanser is the one. It’s easy, it really works, and it doesn’t ask a lot of you. No lively elements to consider, no adjustment interval, no danger of overdoing it. Only a strong every day cleanser that does its job and will get out of the best way.

You probably have oily or acne-prone pores and skin and also you’re additionally coping with congestion, tough texture, or bumpy pores and skin in your face or physique, the SA Cleanser is the extra helpful choice. You’re getting the identical barrier-supporting base however with salicylic acid doing additional work on prime. Simply go in realizing it’s not a substitute for a leave-on BHA – and admittedly, you’d get higher outcomes utilizing a leave-on BHA exfoliant and a non-exfoliating cleanser.

In case your pores and skin is dry, delicate, or compromised, truthfully neither of those is your best choice throughout the CeraVe vary. CeraVe Hydrating facial Cleanser is the one you need in your skincare routine. Each of those will probably be an excessive amount of.

And in the event you’re torn between the 2 and your pores and skin sits someplace within the center (mixture, dehydrated, generally oily, generally not) the Foaming Cleanser is the safer start line. You may all the time add a separate salicylic acid product later and have extra management over how typically you employ it.

CeraVe Foaming Facial Cleanser elements: 

Aqua / Water / Eau, Cocamidopropyl Hydroxysultaine, Glycerin, Sodium Lauroyl Sarcosinate, PEG-150 Pentaerythrityl Tetrastearate, Niacinamide, PEG-6 Caprylic/Capric Glycerides, Sodium Methyl Cocoyl Taurate, Propylene Glycol, Ceramide NP, Ceramide AP, Ceramide EOP, Carbomer, Methylparaben, Sodium Chloride, Sodium Lauroyl Lactylate, Ldl cholesterol, Disodium EDTA, Propylparaben, Citric Acid, Tetrasodium EDTA, Hydrolyzed Hyaluronic Acid, Phytosphingosine, Xanthan Gum.

CeraVe Renewing SA Cleanser Elements: 

Aqua/Water/Eau, Cocamidopropyl Hydroxysultaine, Glycerin, Sodium Lauroyl Sarcosinate, Niacinamide, Gluconolactone, PEG-150 Pentaerythrityl Tetrastearate, Sodium Methyl Cocoyl Taurate, Zea Mays Oil/Corn Oil, Ceramide NP, Ceramide AP, Ceramide EOP, Carbomer, Calcium Gluconate, Sodium Chloride, Salicylic Acid, Sodium Benzoate, Sodium Lauroyl Lactylate, Cholecalciferol, Ldl cholesterol, Phenoxyethanol, Disodium EDTA, Tetrasodium EDTA, Hydrolyzed Hyaluronic Acid, Phytosphingosine, Xanthan Gum, Ethylhexylglycerin.

Related Articles

Latest Articles